EasyManua.ls Logo

Adexa CP-12S - Page 5

Adexa CP-12S
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
application of the device must be followed and complied with. The device should be never
left unattended during operation. Special attention should be paid to when the unit is in use,
if the children are near the appliance. This manual is considered to be a permanent part of the
appliance. Preserve this manual safely for the reference of operators. When passing
on/selling the device to a third party, the manual must be handed over along with the device.
Every person using the unit must act in accordance to the manuals and under consideration
of the safety advice. Never use the unit outdoors.
2.3 Intended use
CAUTION! Any use other than intended purpose is forbidden and is not considered as
conventional.
3. Packaging and storage
3.1Packaging
Please do not throw away the packing materials as they might be useful for storage purposes,
when moving or, in case of damages, when the unit must be sent back for repair. The outer
and inner packing material should be removed completely from the device before installation.
NOTE! Some of the packing materials are re-usable.
3.2 Storage
Do not open the packages until installation. Pay attention to the markings on the carton
surface. Do as the markings indicate. Do not put the whole appliance with the carton upside
down. Care should be taken when moving the appliance. Do not store outdoors. Keep it dry
and dust-free and had better be put in a well-ventilated area. Do not expose it to aggressive
media. Do not expose it to direct sunlight. Avoid mechanical shocks and vibration. In case of
longer storage (> 3 months), make sure you check the state of the packaging regularly.
4. Technical data
Model
CP-12S CP-18S
Working Voltage
220-240V 380-415V
Power Input
6.7KW 10.3KW
Qty of Heating Elements
18 24
Motor
60W 60W
Speed Control
4-75 4-75
Belt Dimension
1020 X 355 (Depth) 1460X505(Depth)
Measurements (mm)
1120X575X480 1560X810X1130
Production Ratio
16 pizza / hr.(300-mm-diamtered) 20 pizza / hr.(300-mm-diamtered)