means oil melting process has been finished, and it begins to
speed up the heating.
5.3.2.3 At the period of waiting L0 to be -----, it indicates the oil
temperature is close to the setting temperature, it can begin to
fry the food within 2 minutes.
5.3.2.4 Put the food into the oil, press the desired product key, and it will
begin to fry.
5.3.2.5 The display will show the pre-set frying time and begin to count
down. (Note: If many kinds of food fry together, it will show the
shortest frying time.)
5.3.2.6 If it has been inserted the shaking time, after X seconds of frying
process (X=pre-set shaking time), the buzzer begins to sound
and will last 3s, then the display shows “SH-“, reminding you to
shake the food. (Note: If it has not been inserted the shaking
time, during the frying circle, the display will not show “SH-“.
5.3.2.7 When the frying process is finished, the buzzer will sound, and
display shows “COOC”, and the corresponding product keys
flash as well. To eliminate the sound, press the flashing keys.
5.3.2.8 Checking temperature: Press key can check the actual
temperature at any moment, double press key can see the
current setting temperature.
5.3.3 Caution
Before using, make sure that the oil tank and heating elements are clean
and dry. Check the tap whether it is closed well or not, and then fill the
tank with oil. The oil level should be as followings:
To Next Page
Loading...