ADIATEK jade 66 - Table of Contents; Introductory Comment

SUMMARY
INTRODUCTORY COMMENT 3
GENERAL RULES OF SAFETY 4
Transfer 4
Storage and disposal 4
Correct use 4
Maintenance 4
LEGEND INSTRUMENT BOARD AND CONTROLS 5
LEGEND MACHINE 5
SYMBOLOGY ON THE MACHINE 6
SYMBOLOGY ON THE MANUAL 6
OPTIONAL ACCESSORIES 7
BEFORE USE 7
Handling of the packed machine 7
Unpacking of the machine 7
Battery installation 7
Battery recharger 8
Incorporated battery recharger (optional) 8
Batteries recharging 8
Batteries recharging with on-board charger (optional) 9
Batteries disposal 9
Batteries charge level indicator 9
Hour meter 9
Squeegee assembly 9
Adjustment of the squeegee 10
Splash guard assembly 10
Brushes assembly 11
FLOOR CLEANING 11
Connection of the batteries to the machine 11
Recovery tank 12
Detergent solution tank 12
3S System “Solution Saving System” (optional) 12
Starting of the machine 13
Forward movement 13
Speed adjustment 13
Working brake 13
Emergency brake 13
Adjustment of the brushes pressure 14
Brushes motor overload protection device 14
Overflow device 14
STOP OF THE MACHINE AFTER CLEANING OPERATION 14
DAILY MAINTENANCE 14
Recovery tank cleaning 14
Suction filter cleaning 15
Automatic disassembly of the brushes 15
Manual disassembly of the brushes 15
Brushes cleaning 15
Squeegee cleaning 16
WEEKLY MAINTENANCE 16
Rear squeegee rubber check 16
Squeegee hose cleaning 16
Squeegee “V” type (optional) 16
Squeegee “V” type (optional): rear rubber check 16
Cleaning of solution tank and filter 17
TWO-MONTHLY MAINTENANCE 17
Front squeegee rubber check 17
Squeegee “V” type (optional): front rubber check 17
SIX-MONTHLY MAINTENANCE 18
Splash guard replacement 18
Check of the brake 18
TROUBLESHOOTING GUIDE 18
Signals on the display 18
The suction motor does not work 18
The brushes motor does not work 19
The traction motor does not work 19
Insufficient water on the brushes 19
Machine does not clean properly 20
The squeegee does not dry perfectly 20
Excessive foam production 20
INTRODUCTORY COMMENT
Thank you for having chosen our machine. This floor cleaning machine is used for the industrial and civil cleaning and is able to clean any type of
floor. During its advance movement, the combined action of the brushes and the detergent solution removes the dirt which is aspirated through
the rear suction assembly, giving a perfectly dry surface.
The machine must be used only for such purpose. It gives the b
est performance if it is used correctly and maintained in perfect efficiency. We
therefore ask you to read this instruction booklet carefully whenever difficulties arise in the course of the machine’s use. In case of need, we ask
you to contact our service department for all advice and servicing as may prove necessary.
3