USB-C PORT FOR CHARGING
If there is not enough light to charge your headphones,
you can always charge them via USB. Connect your
headphones to a USB power source with a USB-C cable
(not included). Once the LED turns green the headphones
are fully charged.
BATTERY CARE GUIDE
Your headphones come equipped with a high performance
lithium-ion battery and the life span is affected by
charging and usage. Follow the guidelines below to keep
your battery in great condition for as long possible.
— Avoid using fast chargers if possible. Fast charging
causes stress on the battery and will degrade it.
— Avoid charging the battery when it is already full or
letting it drain completely. Try keeping the charge
between 30% and 80%.
— If the headphones are stored for a long time, do so with a
half-charged battery and in a cool, dark, and dry place.
— Do not leave or charge the headphones in hot and
unventilated places, 45 °C/113 °F and above, such as in a
parked car or by a window in direct sunlight.
— Avoid charging the battery at low temperatures, below
10 °C/50 °F and using the headphones below 0 °C/32 °F.
— Avoid strong mechanical shocks such as dropping the
headphones on hard surfaces as it might harm the
battery.
LED INDICATOR
— The LED shows the battery charge while charging, from
red through yellow to green (0-100%). It pulses blue
while in Bluetooth pairing mode and is white when the
headphones are turned on and connected.
ENGLISH
To Next Page
Loading...
Need help?
General
