MACHINE WASHABLE EAR CUSHIONS AND HEADBAND
Clean your headphones to keep them fresh and make them
last longer. The headband and the ear cushions can be
removed, and machine washed separately.
WASHING THE EAR CUSHIONS
Remove the ear cushions by turning them slightly
counterclockwise, and then gently pulling them from
the headphones.
To reattach the ear cushions, roll back the fabric, position
the ear cushions on the headphones and turn it clockwise
until it locks in place.
Note! Make sure that the hole on the right ear cushions is
aligned with the USB-C connector on the headphones.
WASHING THE HEADBAND
Carefully pull the inner fabric headband to remove it.
To reattach the inner headband, simply align it and then
snap it in place at the ends.
WASHING THE HEADPHONES
Unplug the any cable before cleaning the headphones.
Make sure everything is completely dry before plugging in
a USB charger.
Use a soft, slightly damp lint-free cloth and mild soap
and avoid getting moist in any openings. Carefully clean
sensitive areas such as speaker mesh and openings with a
dry brush or cotton swab.
— Do not use any sharp objects
— Do not use compressed air
— Do not use cleaning detergents or wet wipes as they
may contain strong chemicals, alcohol, or bleach that
can affect the surface or performance
ENGLISH
To Next Page
Loading...
Need help?
General
