Need help?Do you have a question about the Adixen ADS 1202 H and is the answer not in the manual?
Pumping speed, pressure, power, and other key performance data.
Explains warning symbols and general product safety compliance.
Details risks from electrical, pressure, temperature, and toxic gases.
Identifies and explains the safety labels found on the pump.
Recommendations for protecting the electrical setup and the pump.
Instructions on connecting essential cover plugs for pump operation.
Steps for powering on the pump and verifying indicators.
Critical step to confirm correct motor rotation before operating the pump.
Safety advice and material compatibility for connecting inlet/exhaust lines.
Indicates the position of the J1 connector for the emergency stop function.
Defines the input contact used for the emergency stop function.
Specific safety precautions for processes using Silane and Hydrogen.
Explains the role of each sensor in the M4 monitoring system.
Table of parameters, units, thresholds, and initial configurations.
Details how to configure pump-specific settings within the M4 system.
Table of available parameters, choices, and descriptions for M4 monitoring.
Checks and adjustments for operating modes and switches based on remote control.
Step-by-step process for starting the pump and monitoring its operation.
Procedure for safely stopping the pump and its associated operations.
Covers electrical, thermal, gas, and handling safety for maintenance.
Explains how the system monitors and alerts for scheduled maintenance.
Steps to resolve issues when the pump or Roots does not start.
Guide to diagnosing and resolving warning/fault messages.
Steps to address issues related to pump performance.
General| Cooling | Air-cooled |
|---|---|
| Type | Rotary vane vacuum pump |
| Pumping speed | 120 m³/h |
| Power supply | 3x230/400 V - 50 Hz |
| Oil capacity | 0.5 L |
To Next Page
