To Next PageTo Next Page
Need help?Do you have a question about the ADJ INNO POCKET SPOT and is the answer not in the manual?
Notice regarding energy saving for environmental protection.
Provides details on unpacking and customer support for the Inno Pocket Spot.
Outlines basic operations, safety information, and maintenance of the unit.
Lists the key features and capabilities of the Inno Pocket Spot fixture.
Information on the limited warranty, validation, and online registration.
Important warnings and precautions for safe handling and operation.
Essential safety warnings to prevent electrical shock, fire, and damage during operation.
Instructions and considerations for securely installing the fixture in various positions.
Specifies the suitable environmental temperature range for optimal fixture performance.
Details about the automatic voltage switch for universal power compatibility.
Explanation of DMX-512 communication for intelligent fixtures.
Information on connecting multiple fixtures for synchronized operation.
Specifications for DMX data cables and channel modes.
Details on converting between 3-pin and 5-pin XLR DMX connectors.
Explanation of DMX line termination to prevent erratic behavior.
Procedure to set the DMX address for fixture control.
Options to select between 9 or 11 DMX channel modes.
How to select and activate built-in show modes.
Selection of different dimmer curves for lighting effects.
Setting up units for master/slave operation.
Defines fixture behavior when DMX signal is lost.
Enabling and disabling the sound-activated mode.
Adjusting the sensitivity for sound active mode.
Inverting the pan movement direction.
Inverting the tilt movement direction.
Managing the LED display's on/off status after a delay.
Reversing the display orientation by 180 degrees.
Running a self-test program for the fixture.
Displaying the total operating time of the fixture.
Displaying the current software version of the unit.
Resetting the unit to its factory default settings.
Adjusting the original home position for pan movement.
Adjusting the original home position for tilt movement.
Adjusting the original home position for the gobo wheel.
Adjusting the original home position for the color wheel.
Using a DMX controller to create custom lighting programs.
Operating the unit to the beat of music.
Running one of four built-in shows.
Linking multiple units for synchronized operation without a controller.
Functions and usage of the infrared remote control.
Detailed breakdown of functions for the 9-channel DMX mode.
Detailed breakdown of functions for the 11-channel DMX mode.
Luminosity data at various distances.
Visual representation of dimmer curve effects and fade times.
Instructions for locating and replacing the unit's fuse.
Guidelines for periodic cleaning of internal and external optics.
Common problems and their solutions for the unit.
Details of the product warranty, terms, and conditions.
Technical details including model, voltage, power, dimensions, and warranty.
Notice regarding energy saving for environmental protection.
Provides details on unpacking and customer support for the Inno Pocket Spot.
Outlines basic operations, safety information, and maintenance of the unit.
Lists the key features and capabilities of the Inno Pocket Spot fixture.
Information on the limited warranty, validation, and online registration.
Important warnings and precautions for safe handling and operation.
Essential safety warnings to prevent electrical shock, fire, and damage during operation.
Instructions and considerations for securely installing the fixture in various positions.
Specifies the suitable environmental temperature range for optimal fixture performance.
Details about the automatic voltage switch for universal power compatibility.
Explanation of DMX-512 communication for intelligent fixtures.
Information on connecting multiple fixtures for synchronized operation.
Specifications for DMX data cables and channel modes.
Details on converting between 3-pin and 5-pin XLR DMX connectors.
Explanation of DMX line termination to prevent erratic behavior.
Procedure to set the DMX address for fixture control.
Options to select between 9 or 11 DMX channel modes.
How to select and activate built-in show modes.
Selection of different dimmer curves for lighting effects.
Setting up units for master/slave operation.
Defines fixture behavior when DMX signal is lost.
Enabling and disabling the sound-activated mode.
Adjusting the sensitivity for sound active mode.
Inverting the pan movement direction.
Inverting the tilt movement direction.
Managing the LED display's on/off status after a delay.
Reversing the display orientation by 180 degrees.
Running a self-test program for the fixture.
Displaying the total operating time of the fixture.
Displaying the current software version of the unit.
Resetting the unit to its factory default settings.
Adjusting the original home position for pan movement.
Adjusting the original home position for tilt movement.
Adjusting the original home position for the gobo wheel.
Adjusting the original home position for the color wheel.
Using a DMX controller to create custom lighting programs.
Operating the unit to the beat of music.
Running one of four built-in shows.
Linking multiple units for synchronized operation without a controller.
Functions and usage of the infrared remote control.
Detailed breakdown of functions for the 9-channel DMX mode.
Detailed breakdown of functions for the 11-channel DMX mode.
Luminosity data at various distances.
Visual representation of dimmer curve effects and fade times.
Instructions for locating and replacing the unit's fuse.
Guidelines for periodic cleaning of internal and external optics.
Common problems and their solutions for the unit.
Details of the product warranty, terms, and conditions.
Technical details including model, voltage, power, dimensions, and warranty.
Power| voltage | 100 - 240V, 50/60Hz |
|---|---|
| power consumption at 120V | 26W |
| power consumption at 230V | 27W |
Lighting Specifications| LED | 1 x 10W White CREE LED |
|---|---|
| beam angle | 13 Degrees |
| colors | 7 + White |
| gobos | 7 + Spot |
Weight and Dimensions| length | 6.25 inches |
|---|---|
| width | 5.75 inches |
| height | 10.5 inches |
| weight | 7 lbs / 3 kgs |
