ADJUSTABLE
COMFORT
ASSEMBLY INSTRUCTIONS
STEP 1: Carefully open the carton and remove all boxes then lay out
the top and the bottom of the base as one unit as shown. Cut all zip
ties and remove.
STEP 2: Attach the center tube with the two center legs and tighten the
four center leg bolts with the allen wrench.
STEP 3: Attach each motor by sliding the pins through motor slot at-
tached to the frame. The head motor will have a longer shaft than the
foot motor.
STEP 4: The label on the motor should be facing up when you are at-
taching the motor.
For customer service call 1-877-707-7533
or email azcustomerservice@classicbrands.org
To Next Page
Loading...
