ADJUSTABLE
COMFORT
STEP 5: Before plugging each cable into the control box, remove the
plug lock that is located between the ports for the cables and the color
stickers on the control box. Use your forefinger and thumb to press on
the sides of each plug lock to pull o. Plug the cables in the appropri-
ate color ports and replace the plug lock. This lock will hold the cables
in tightly.
STEP 8: Insert the mattress retainer bar into the grommets as shown.
STEP 6: For the remaining legs, choose the leg height that works for
you. To attach the corner bed legs, rotate the end bolts into the holes in
the corner brackets. Rotate the center legs into the hole in the pre-at-
tached leg.
STEP 7: Put remaining legs on the base and tighten. When ready to flip
the base over, make sure you do not use the legs as leverage as they
may damage the legs and/or base.
ASSEMBLY INSTRUCTIONS
For customer service call 1-877-707-7533
or email azcustomerservice@classicbrands.org
To Next Page
Loading...
