Need help?Do you have a question about the Adkins PARTY BAR X5 and is the answer not in the manual?
Configure unit's operating mode using four function buttons on the controller bar.
Connect Party Bar X5 systems using 3-pin XLR cables for DMX communication.
General| Light Source | LED |
|---|---|
| Power Source | AC |
| Voltage | 100-240V |
| Frequency | 50/60Hz |
| Weight | 3.5 kg |
| DMX Channels | 4 |
| Lighting Type | RGB |
| Control | DMX, Sound Active, Master/Slave |
| Effects | strobe |
To Next Page
