ADL LIGHT - Insert Sliding Runners; Prepare Sliding Runners by Removing Screws; Attach Hardware to Sliding Runners; Insert Sliding Runners into Slots

-1-
2
A
2.a 2.b
2.c
B
1
TOGLIERE LE MASCHERINE DI COPERTURA
(REMOVE MASKING COVERS)
INSERIRE CARRELLI DI SCORRIMENTO (FORNITI CON IL CONTROTELAIO)
(INSERT SLIDING RUNNERS (DELIVERED WITH COUNTER-FRAME))
TOGLIERE VITI IN DOTAZIONE
Remove supplied screws
INTRODURRE I CARRELLI
NELL'APPOSITA ASOLA
Insert sliding runners
in the buttonhole
AVVITARE BULLONE "A"
E DADO "B" DEL KIT
FERRAMENTA ADL
AL CARRELLO
Tighten bolt "A" and
locknut "B" of ADL hardware
kit to the sliding runners