How to set Adler Battery Charger in the charging mode?
If your Adler Battery Charger is on but not charging, it might not be in charging mode. Try pressing the MODE DISPLAY button until the battery percentage or voltage reading appears on the display.
Why does Adler ADCHARGER 15 show full charge so quickly?
If the green FULL CHARGE LED turns on shortly after connecting your Adler Battery Charger to the battery, it could mean the battery is already fully or recently charged. To resolve this, if the battery is in a vehicle, turn the headlights on for a few minutes to lower the battery voltage, and then try charging again. You might also try selecting a lower CHARGE RATE.
What to do if Adler Battery Charger indicator lights are erratic?
If the indicator lights on your Adler Battery Charger are behaving erratically, and it's not explained in the manual, it may be due to a button being pressed during plug-in or a defect. Ensure nothing is touching the control panel, then unplug the unit and plug it back in.
Why is Adler Battery Charger display still on after unplugging?
If the display of your Adler Battery Charger remains on after unplugging it from the mains, the battery is likely supplying power to the display. Disconnect the battery to turn off the display.
General| Brand | Adler |
|---|---|
| Model | ADCHARGER 15 |
| Category | Battery Charger |
| Language | English |
To Next Page