8
•
Installation
2.4.3 Installation Procedures
1. Turn off your computer
2. Turn off all accessories (printer, modem, monitor, etc.)
connected to computer.
3. Remove the cover from your computer.
4. Select a 32-bit PCI expansion slot. PCI slot are short than ISA
or EISA slots and are usually white or ivory.
Caution !! Don‘t put PCI-7230 card into ISA or EISA slot.
5. Before handling the PCI-7230, discharge any static buildup on
your body by touching the metal case of the computer. Hold
the edge and do not touch the components.
6. Position the board into the PCI slot you selected.
7. Secure the card in place at the rear panel of the system unit
using screw removed from the slot.
2.4.4 Running the 7230UTIL.EXE
A testing program is included in this utility, you can check if your
PCI-7230 can work properly. Refer Section 5.2 for further
detailed information.
To Next Page
Loading...
