Do you have a question about the Admiral ATW4475VQ1 and is the answer not in the manual?
Explains safety alert symbol, DANGER, and WARNING messages for potential hazards.
Lists required tools and parts for washer installation, including optional items.
Specifies proper location criteria for washer to ensure performance and minimize noise.
Details requirements for a floor standpipe drain system, including height and diameter.
Outlines requirements for a wall standpipe drain system.
Explains requirements for a floor drain system, including siphon break kits.
Specifies requirements for draining into a laundry tub, including capacity and height.
Details electrical safety, plug requirements, and hazards of adapters/extension cords.
Provides instructions for proper grounding of the washer for electrical safety.
Instructions for removing shipping materials and moving the washer before installation.
Procedure to gently pull the drain hose out of the washer cabinet.
Guide on how to feed and anchor the drain hose using the provided form.
Instructions for positioning the drain hose correctly in a standpipe or laundry tub.
Steps for attaching inlet hoses to hot and cold water faucets, including tightening instructions.
Running water through hoses to clear debris and prevent clogs before connecting to the washer.
Attaching inlet hoses to the correct hot and cold water valves on the washer.
Procedure to check for leaks at faucet and washer connections after attaching hoses.
Securing the drain hose with a tie strap to prevent splashing.
Propping the washer and preparing the leveling feet and jam nuts.
Installing the front leveling feet into threaded holes on the washer.
Tilting the washer to engage the self-adjusting rear leveling feet.
Using a level to check if the washer is balanced on all four feet.
Final checklist to ensure all installation steps and requirements are met before use.
Loading...