08
Adjustment methods of each part
VI.Battery installation
The battery is mainly composed of two pieces, cell and protection board PCM (power battery is
generally called battery management system BMS). Cell is equivalent to the heart of the battery,
and the management system is equivalent to the brain of the battery.
Cell is mainly composed of positive electrode material，negative electrode material, electrolyte,
diaphragm and Shell, while the protection board is mainly composed of protection chip(or
management chip), MOS tube, resistor, capacitor, PCB board, etc.
Open the fixed lock with the key. Dial off the power plug, take out the battery, instead, insert the
power plug, lock the battery lock, and confirm that it is safe and firm before riding.
⑦ Folding pedal ⑧ Open the frame and fold safety lock
⑨ Folding frame ⑩ Finish folding
1.Open folding connector 2.Fold the vehicle and pull out the key
insert the key to unlock
To Next Page
Loading...
