FLASH CS3
User Guide
81
Add finishing touches
Flash places each image on separate keyframes. If you have more than four images, all of the other layers must have
an equal number of frames. Your images appear in the Library panel.
1 Delete the old images that were included in this document from the library.
2 Change the title, date, and caption at the top for each image. Replace text as desired.
The template automatically determines how many images are in your document and indicates which photo you are
currently using.
Use autoplay mode
The Photo Slideshow template also has a built-in autoplay mode that automatically changes the photo after a set
delay. The template is set to a default delay time of 4 seconds, but you can change this setting.
1 Select the controller component on the Stage. It is an instance “mc, controller” component.
2 Open the Component inspector (Window > Component Inspector).
The Parameters tab is selected by default.
3 Select the delay, and change this value to a new delay value, in seconds.
4 Save and publish your document.
To Next Page
Loading...