CapWiz 3.6 Release Notes:
You must un-install the previous version of CapWiz before installing
version 3.6.
Un-Install the Current CapWiz Application:
1.) Un-install your old CapWiz and other related programs before installing version
3.6. To Begin removing the existing version - Go to Control Panel, Add/Remove
Programs/
Un-Install the following:
- ADS Tech CapWiz V3.x CapWiz
- ADS Tech CapWiz V3.x CapWiz Master Installer
- Ulead Straight-to-Disc SDK
2.) During Un-Install of CapWiz and CapWiz Master installer, select CUSTOM, and
then click “Select All”
on every screen. This will give you the cleanest un-install
and fully clear the system registry of the previous installation.
3.) Once CapWiz application is un-installed, Perform the same instructions above for
the Ulead Straight-to-Disc SDK
4.) Restart the computer
PREPARING to Install New Version
1.) Download the CapWiz update. This will be a compressed or .zip file.
To Next Page
Need help?
General
