ADS POWEVER A2-PE200 User Manual

Verifies product condition and ratings post-shipping.

Describes suitability for rapid/spiral doors, performance aspects, and control methods.

Explains system operation methods including control box, jog, automatic, and emergency stop.

Describes the function of various keys like Up, Down, Stop, and LCD navigation keys.

Discusses the pre-installed absolute encoder solution for limit switches in PE200/PE500 motors.

Explains how to change the operation mode (Manual, Auto, Jog) using the control panel.

Details the process of using the 'Set' key, including password input for configuration.

Details various parameters like opening/closing speed, slowdown distances, and auto-closing time.

Guides the user to select between Absolute Encoder and Proximity Switch for limit sensing.

Covers setting open/close limits and calibration results (Programmed/Failure).

Instructions for configuring the real-time clock's year, month, day, hour, and minute.

Configuration for RS485 slave address and baud rate for communication.

Setup for various input contacts like E-Stop, Safety, Start, and Open/Close Limits.

Describes how to select and change advanced parameter values using an index.

Allows setting work cycles for next maintenance.

Covers setting system password, work cycles, time, and auto-testing.

Option to set the system language, defaulting to English.

Guides on how to restore the system to its original factory settings.

Displays the current status of various input ports like Manual Open, Safety, etc.

Shows total work cycles and cycles since last maintenance.

Provides access to the error history, showing fault codes and their settings/dates.

Allows querying the value of specific system registers.

Displays system version and current date/time.

Lists all possible error codes with their corresponding descriptions for troubleshooting.