Cloud Link Quick Installation Guide 8
Add Z-Wave Devices
This section provides instructions for enrolling a Z-Wave enabled
device. Z-Wave devices include: light switches & lamp modules,
thermostats, door locks and garage door controllers.
1. After activating the Cloud Link, sign in to your ADT Pulse
account.
2. Click the Manage Devices button on System tab.
3. Select Switches - Doors - Thermostats - Others from the
Manage Devices screen.
4. Click Add at the lower left side of the Z-Wave Devices screen.
5. Follow the instructions on-screen and in the user guide that
accompanies the Z-Wave Device.
When the device has been added, the Z-Wave LED on the front
of the Cloud Link is lit solid green.
Note: The Cloud Link must be activated prior to adding Z-Wave
device.
To Next Page
Loading...