21
Wireless Enrolment
LED Colour/Pattern
Status
Description
Camera Status
Solid Green
LED Off
Blinking Green
Solid Red
Blinking Red
Blinking Blue
Blinking White
Factory Reset
Blinking Green and Red
Power Off
Connected to the
Internet
The camera is switched off
Local network
connection
Not Connected
Camera Booting
WPS Mode
Access Point Mode
Factory Reset
The camera has a local
network connection and
connected to ADT Interactive
Local Internet Connection
established but is not
connected to ADT Interactive
No connection to local
network or to the Internet
Power is on and Camera is
booting up
Connection made by holding
down the reset button
for about 3 seconds
Camera is reverting to
factory default settings
Connection made by holding
down the reset button
for about 6 seconds
Led light can be programmed to be turned off after connected mode.
LED Reference Guide
7 | Troubleshooting & FAQ’s
To Next Page
Loading...
