ADT ADC-V523 - Enrolling Your Camera on ADT Interactive; Using the ADT Interactive App; Using the ADT Interactive Web Browser

8
4.A Using the ADT Interactive App
1. Open the ADT Interactive App on your device
2. Open the menu by selecting the menu icon and select
3. Select
4. The camera should have been discovered by the network. Click ‘Install’ to add the
camera to your ADT Interactive account.
If the device can’t be found, click on ‘Can’t find?’ and follow on-screen instructions.
5. Name the device and click ‘Next’.
6. Wait for the camera to be installed to the account. Once the camera has been
installed, follow the on-screen instructions regarding placement of the camera and
of setting up camera analytics (optional).
Once done, configuration is complete and you will receive a confirmation.
Once the camera has a Wi-Fi connection, it will need to be enrolled on your ADT
Interactive account. There are 2 possible ways to do this, follow the instructions below:
Using the ADT Interactive App Using the ADT Interactive Web Browser
Access ADT Interactive via the app if
you intend to access and manage your
new Wi-Fi camera system this way.
Access ADT Interactive via the web if you
prefer to manage your new Wi-Fi camera
system this way or have not installed the app.
4.A
4.B
4 | Enrolling Your Camera on ADT Interactive