– 22 –
&KLPH0RGH
CHIME mode alerts you to the opening of a perimeter door or window while the
system is disarmed. When Chime mode is activated:
• Three tones sound at the touchpad whenever a perimeter door or window is opened.
• Interior zones do not produce a tone when they are faulted.
• Pressing the READY key will display the open protection points.
To turn Chime Mode on/off
(system must be disarmed)
:
+ 9
(Security Code)
CHIME
The CHIME message appears when on. Perimeter
zones will cause a tone when faulted.
The CHIME message disappears when Chime mode
is off.
(-7%61)(
6)%(= 83 %61
English Display:
READY
(-7%61)( ',-1)
6)%(= 83 %61
English Display:
CHIME
Voice Chime: You can set the Voice Touchpads (if installed) to announce faulted
(opened) entry/exit or perimeter zones whenever normal Chime mode is on.
To turn Voice Chime Mode on or off:
# + 0 + 2 + 4
(normal Chime mode must be on first)
When Voice Chime is on, any faulted zone(s) causes a voice status announcement,
chime and display. When off, the sounder still provides chime if normal Chime
mode is on.
To Next Page
Loading...
Need help?
General
