USING YOUR SYSTEM: PARTITIONS
Partitions Access
When the panel is locked or the screen
times out, you will be required to re-enter
your code to gain access. The code you
enter will determine which partition you
enter. Different codes may gain access to
all four partitions at once or to one
individual partition.
User Codes
Master codes give full access to Advanced
Settings. Because the Master code would
be entered here, you will not have to re-
enter your code to gain access to the
settings menu. User codes can be
assigned to give access to arming and
disarming functions in a particular partition.
To assign single or multiple partitions
access to a User code, enter the panel
using the Master code and edit permissions
in the User Management settings menu.
Exclusions:
You cannot partition Z-Wave or ADT's cameras today. This functionality will come at a later date via software update. Global
sounds and sirens can be turned on from the Sound menu when partitions are enabled. When global sounds and sirens are
turned on, all sounds and sirens will sound across all partitions.
User Access
When creating a new user, you will be given the option to grant that
user access to individual partition or all partitions. Only the number or
partitions programmed will show up here. Simply check the box next
to the desired option.
Important Note: If 6-digit codes are enabled in the panel but not changed in User
Management, the panel will add two Zeros to the end of the original code. Example: If original
user code is 1234 and 6-digit codes are enabled but the user code isn’t changed, the new user
code will be 123400.
Max 18°
Min 8°
11 November 2022
1
To Next Page
Loading...