USING YOUR SYSTEM: CAMERA
Camera Page
ADT Smart Home Hub's built in camera captures photos in a
variety of situations:
Disarm Photos
When the panel is disarmed manually, the built in camera takes a
photograph and saves it in the “ARM/DISARM” section. These
photos are accompanied by the username of the individual who’s
code was used, the date, and the time.
Settings Photos
When someone attempts to access your panel settings with an
invalid code, the built in camera takes a photograph and saves it
in the “SETTINGS” section. These photos are accompanied by
the date and time.
Alarm Photos
When the alarm is triggered, the built in camera takes a
photograph and saves it in the “ALARMS” section.
1- View Photo
Touch a photo thumbnail on the right
to view it on the left.
2- Full Screen
Touch the photo on the left to view it
full screen. Touch it again to return to
the camera page.
Note: While viewing photos full
screen you can swipe left/right to
view additional photos
Photos to your Phone using
ADT
Smart Services
Go to your ADT
Smart
Services
portal login in
page. You can access
this from the adt.co.uk
website Existing
Customers Tab.
Click the "Automation"
tab
Then click “Edit” on the
“Panel Camera Disarm
Image Uploads” section
Add Recipients to
receive disarm photos
to smartphone.
Note: For supplementary use only, not part of the Fire and Security system
Alarm Videos
When the alarm is triggered, the built in camera will record up to
a 4 minute video clip. This video is stored locally on the panel
1
2
3
Max 18°
Min 8°
11 November 2022
1
Sign In