Adtec EN-30 - Profile Management; Profile Menu Operations

Profile Menu
The following diagram illustrates the structure and flow of the Profile Menu on the Adtec
EN-30 device:
Control
Function
API Command
Select
Select a previously saved profile to RUN / LOAD as
the current configuration. Press <select>, then use
up/down arrows to browse through available profile
names. Press <enter> to run the selected profile.
*.SYSD PROFILE
Save
Saves the currently running configuration into a file
stored on the unit. Press <select>, then use
up/down/left/right arrows to name a profile. Press
<enter> to save the current profile name.
*.SYSD PROFILE
Delete
Deletes previously saved files from stored memory.
Press <select>, then use up/down arrows to browse
through profile names. Press <enter> to delete
selected profile
*. SYSD PROFILE