Adtec EN-30 - Network Sub Menu Configuration

Backlight Dim Delay
Action
Press <Select>
Using the <Up> and <Down> arrows, select the value you wish.
Press <Enter> to save your selection
Network Sub Menu
Item
Function
Options
Ethernet IP Address
This is the address of your device
on your network specific to the
Ethernet Port.
user-defined using the numeric
keypad
Default is 192.168.10.48
Ethernet IP Mask
Defines the unit relative to the
rest of your network.
user-defined using the numeric
keypad
Default is 255.255.255.0
Ethernet DHCP
The Dynamic Host Configuration
Protocol allows your device to
self-locate network Ethernet
parameters.
On (finds own DHCP Address)
Off (defaults to last entered IP
Address)
Default is OFF
GIGE IP Address
This is the address of your device
on your network specific to the
GigE Port.
user-defined using the numeric
keypad
Default is 192.168.20.48
GIGE IP Mask
Defines the unit relative to the
rest of your network.
user-defined using the numeric
keypad
Default is 255.255.255.0
GIGE DHCP
The Dynamic Host Configuration
Protocol allows your device to
self-locate network GigE
parameters.
On (finds own DHCP Address)
Off (defaults to last entered IP
Address)
Default is OFF
Gateway IP Address
The gateway is a routing
mechanism that passes traffic
between different subnets and
networks.
user-defined using the numeric
keypad
Default is 192.168.10.1
Stealth IP Address
This is a security feature that
user-defined using the numeric