Adtec EN-30 - Time, NTP, Alarm, and SNMP Settings

allows only the designated
Stealth IP Address to
communicate with the unit for
FTP and other services. This
control allows one-point override
access to the Stealth IP Address.
keypad
Default is 0.0.0.0. Using all 0s
effectively turns this function
off.
Time Sub Menu
Item
Function
Options
Time
Defines system time
user-defined using the numeric keypad
Timezone
Defines the time zone the unit
operates in
NTP Sub Menu
Item
Function
Options
NTP Status
Network Transfer Protocol
Read-only
NTP IP Address
IP address designated for
Network Transfer Protocol
user-defined using the numeric keypad
Default is 0.0.0.0. Using all 0s
effectively turns this function off.
Alarm
Item
Function
Options
Event Record
Log of events outside of
regular operating parameters
scroll up and down to view log items
SNMP Sub Menu
Item
Function
Options
SNMP
Controls the status (ON/OFF)
of the Simple Network
Management Protocol (SNMP)
feature. We support SNMPv2c
version.
OFF
ON
CLEAR
Read-only
community
The Simple Network
Management Protocol (SNMP)
Read-Only Password. Default
Value: "adtec"
user-defined
Read-write
community
The Simple Network
Management Protocol (SNMP)
Read-Write Password. Default
user-defined