Need help?Do you have a question about the ADTRAN Total Access 908e and is the answer not in the manual?
General| Routing protocols | IP |
|---|---|
| Supported protocols | BGP, Multilink, Frame Relay, OSPF, PPP, RIP (v1 and v2), Multilink PPP, GRE, HDLC, IGMP V2, PAP and CHAP, Multi-VRF |
| Supported network protocols | T1/FT1, 10/100Base-T |
| Firewall security | Yes |
| Wi-Fi | No |
| DSL specification | - |
| Data transfer rate | 0.1 Gbit/s |
| Ethernet LAN (RJ-45) ports | 2 |
| Mounting type | Rack mounting |
| Rack capacity | 1U |
| LED indicators | LAN |
| Flash memory | 32 MB |
| Internal memory | 128 MB |
Weight and Dimensions| Weight | 2.95 g |
|---|---|
| Dimensions (WxDxH) | 437 x 436 x 267 mm |
Describes the Total Access 900e Series unit and lists items included in the shipment.
Details the front panel layout, various LEDs, and their operational indications.
Explains the rear panel connectors for the 908e model: VOICE, FXO, T1, Ethernet, USB, CRAFT.
Details rear panel interfaces specific to the Total Access 916e and 924e models.
A comprehensive table detailing the meaning of each front panel LED indicator.
Lists required tools, explains mounting options (wall/rack), and details grounding instructions.
Guidance on connecting the unit to a power source, including safety precautions.
Details BBU models, features, unpacking, inspection, and critical safety notices.
Instructions for wall mounting BBUs and information on their maintenance and lifespan.
Pin assignments for the 50-pin Amphenol VOICE connector on the base unit.
Details pin assignments for FXO, T1, Ethernet, and CRAFT interfaces.
To Next Page