1. General
1.1 Compliance
Aduro 9.4 complies with the EN13240 European standard as well as the NS3058 Norwegian standard and is
thereby approved for installation and use in Europe. At the same time, the manufacturing process is subject
to external quality control. Aduro 9.4 also carries the Nordic Ecolabel, which guarantees that the wood
burning stove complies with the most stringent environmental requirements and has been manufactured in
an environmentally correct manner. DoP (Declaration of Performance) can be downloaded at
www.adurofire.com/download.
1.2 Technical data
Distance from bottom of stove to centre of rear outlet
Min. 63.4 cm (the lower edge of the stove
must be minimum 20.6 cm above the
floor)
Distance from centre of exhaust branch to rear edge of stove
Primary, secondary, and tertiary air supply
Maximum combustion amount per hour (wood)
Heat rating in buildings with
- Optimum insulation
- Average insulation
- Inadequate insulation
1.3 Transportation
When taking your wood burning stove home, please ensure that it travels in an upright position. If you wish
to lay it flat, it is important that you remove all loose parts from the combustion chamber (cast iron grate and
loose fireproof tiles) and remove the ashpan. Please use wood from the packaging for the first use. The
plastic packaging should be discarded.
To Next Page
Loading...