ADURO H1 - Cleaning and Maintenance

72
• LIGHTING: The smoke temperature has not been reached after two attempts of ignition.
• CO: The CO-level is too high.
• STOPPED: The ignition failed - open the door and check if pellets have accumulated in the brazier.
When the cause of the alarm has been rectified, the stove can be reset by holding the ON/OFF button on the
stove’s control panel. You can then start the stove as usual.
7. Cleaning and maintenance
7.1 Daily maintenance
On the days the hybrid stove is in operation, we recommend 2 quick cleanings per day while the stove is still
on.
All cleaning and maintenance of the hybrid stove (except for the quick, daily
cleaning) should only be carried out when the stove is cold, and the power is
disconnected.