Why my ADURO Pellet stove app does not connect to the stove?
If the ADURO Pellet stove app isn't connecting, the issue might be due to a connection problem. Verify your Wi-Fi connection. If the connection is active, try restarting the app and reconnecting.
What to do if ADURO Pellet stove shows 'Alarm: no more pellet'?
If your ADURO Pellet stove displays the 'Alarm: no more pellet' message, it means that the stove has run out of pellets. Simply refill the tank with new pellets.
Why ADURO H1 pellet combustion is deactivated after loading wood?
The pellet combustion on your ADURO Pellet stove might be disabled after loading wood because the door is not closed correctly. Check the closing mechanism and the sensor. Another reason might be that the door remained open for more than 3 minutes; it must be closed sooner to prevent deactivation.
What to do if ADURO H1 Pellet stove shows 'Alarm: cannot light up'?
If your ADURO Pellet stove displays the alarm 'cannot light up', this may be due to a lack of adequate draft. Check the installation and draft.
Why ADURO Pellet stove pellet combustion is deactivated after burning the wood?
The pellet combustion might be deactivated on your ADURO Pellet stove after burning wood if the smoke temperature exceeds 50°C. Once the smoke temperature drops below 50°C, the pellet combustion will resume automatically.
How to fix false 'no more pellet' alarm on ADURO H1 Pellet stove?
If your ADURO Pellet stove is showing a false 'no more pellet' alarm, and combustion stops after 60 minutes, it could be due to a weak or insufficient draft. Check the installation and draft. Alternatively, the stove may not be reaching the expected temperature for the selected power level. In this case, position the air regulator to position 5.
Why is the glass on my ADURO Pellet stove very dirty or blackened?
If the glass on your ADURO Pellet stove is getting very dirty or blackened, it could be due to insufficient draft. Verify the installation and draft. Another possible cause is that the glass cleaning function is deactivated. Adjust the air regulator to a setting between 2 and 4 when burning wood.
Why does pellet accumulate in the burner of my ADURO H1?
If pellet is accumulating in the burner of your ADURO Pellet stove, it could be due to a lack of adequate draft. Check the installation and the draft. Another cause could be that the burner cover is not correctly aligned. Inspect the burner alignment.
Crucial safety information and warnings for operating the Aduro hybrid stove.
Specifies safe distances to flammable materials for stove placement.
Instructions for connecting the flue pipe to the stove and chimney.
Steps to connect the stove and set up the Aduro Hybrid app.
Instructions and tips for lighting and maintaining a wood fire.
Detailed steps for manually lighting a fire with firewood.
Instructions for operating the stove using only wood pellets.
Steps for igniting the stove using pellets via control panel or app.
Troubleshooting common issues related to insufficient chimney draft.
Addressing smoke issues and cold plugs in the chimney.
Requirements for annual inspection and maintenance by a certified professional.
General| Category | Pellet stove |
|---|---|
| Diameter smoke outlet (mm) | 80 |
| Fuel Type | Wood Pellets |
| Ignition Type | Automatic |
| Thermostat | Yes |
To Next Page
