68
Flame generates high quantity of ”sparkles” = the chimney draft is too high
Flame is low and brazier is overflown = the chimney draft is not sufficient
You can partly compensate for an inadequate chimney draft by increasing the fan speed on the hybrid stove.
This is done in the service menu of the app.
5. Control of Aduro H5
Aduro H5 has the following ALARM modes where pellet delivery must be stopped immediately:
• SMOKE SENSOR: smoke sensor defect.
• SHAFT SENSOR: shaft sensor defect.
• TERMO: shaft sensor too hot.
• DOOR CONTACT: door open.
• PELLET DAMPER: damper closed.
• EXIT: defect exit for external auger.
To Next Page
Loading...
