72
Cleaning the Aduro H5
The stove’s surface is treated with a heat resistant Senotherm® paint, which will stay at its best just by being
vacuumed with a small, soft mouthpiece or dusted with a soft, dry cloth. Do not use spirit or other solvents, as
they will remove the paint.
The inside of the Aduro H5 and the flue pipe can be cleaned through the door or alternatively through the
cleaning aperture in the flue pipe/chimney. The upper fireproof tile (the exhaust deflector) can be removed.
To allow free access to the top of the Aduro H5 and the flue pipe, remove the exhaust deflector in steel.
Cleaning of the inside of the Aduro H5 and the flue pipe should be undertaken at least once a year, or more
frequently if necessary, depending on how often the Aduro H5 is used. This work can also be carried out by
the chimney sweep or your local Aduro GO partner.
Repairing the surface
Aduro stoves are painted with a heat-resistant paint that can withstand temperatures up to 500 degrees. If
the surface of the stove gets scratched or worn, it can easily be renewed using this type of paint. Everybody
can repair the surface and obtain a perfect result. The paint is available in black metallic from your local
dealer or at
www.aduroshop.com.
Spare parts and unauthorized alterations
You may only use original spare parts for your stove. All forms of unauthorized alterations to the stove are
strictly forbidden, as the stove will no longer comply with the approved specifications. At
www.aduroshop.com you can buy original spare parts for your stove.
7. Accessories
For Aduro stoves we offer a wide product range of accessories to fulfil the experience: Companion sets,
firewood baskets and buckets, fireplace grid, briquette buckets, floor hearths in glass and steel, flue pipes,
Aduro Easy Firelighter, and Aduro Easy Clean pad. For further information, go to
www.adurofire.com/accessories.
Do not clean the hybrid stove with water. If the stove is exposed to moisture,
the stove may develop rust.
To Next Page
Loading...
