Revision date: 18.10.2023
Replacement of the control board on Aduro Hybrid stoves
Difficulty: Intermediate
Time consumption: 45 minutes
Tools: TORX 15 screwdriver, PH2 Screwdriver, cable ties (Optional)
Components: Control board (aduroshop.com)
NB: All changes and adjustments must be conducted when the stove is cold and disconnected from
the power supply.
Checking the function of the control board
To check the function of the control board and whether it needs to be replaced, it is important to make sure
that the cables are placed and attached correctly.
Try activating different functions like the augers, fan, and ignitor, to see if the lights on the board change. If
not, the board must be replaced.
Replacing the control board
It is important that the control board is handled with care, and that it is not exposed to static electricity when
being replaced. To replace the control board, open the stove’s lower door and unscrew the plate on the
lower left side. Gently pull out the board while making sure not to damage the board and cables:
To Next Page
Need help?
General
