Need help?Do you have a question about the Advance acoustic MAP-101 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Damping Factor | >100 |
| Weight | 10kg |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | >100dB |
| Inputs | 5 x RCA, 1 x Phono |
| Input Sensitivity | 2.5mV (Phono) |
| Input Impedance | 47k Ohms |
| Outputs | 1 x RCA (Pre-out), Speaker Terminals |
Warnings about electrical shock, fire risk, and exposure to liquids/moisture.
Instructions on not opening the unit and careful handling during transport.
Key safety notices concerning plug usage and electrical shock prevention.
Emphasizes reading, retaining, heeding warnings, and following operating instructions.
Precautions for water, ventilation, heat, power sources, grounding, cord protection, and non-use periods.
Details conditions requiring qualified service and user limitations on repairs.
ON/OFF button and input selection for CD and Tuner sources.
Volume knob and selection for Aux.1 and Aux.2 inputs.
Phono input for turntables and headphone jack for private listening.
High Bias indicator and volume level display.
Speaker output terminals and ground screw terminal for turntables.
Pre-out/Main-in bridge, general inputs, and dedicated Phono input.
Selector for High Bias mode and the power supply socket.
Power output, frequency response, distortion, S/N ratio, and channel separation.
Input impedance, levels, AC input, and maximum power consumption.
Transformer details, dimensions, and net/gross weight.
To Next Page