Advanced Bionics Cedis e100 DS Drying Kit - User Manual

Cedis e100 DS Drying Kit
QUICK REFERENCE GUIDE
1. Plug power cable into drying kit and open lid.
3. Depending on the amount of moisture on the processor decide whether to select:
a.
Regular drying cycle (1.5 hours drying time). Press button once a red light is displayed.
b. Intensive drying cycle (3 hours drying time). Press button twice a blue light is displayed.
2. Remove battery & cable from processor and place
these with the headpiece into the drying kit.

Summary

Cedis e100 DS Drying Kit Operation

Setup and Loading Components

Connect power cable and place processor, battery, and headpiece into the drying kit.

Drying Cycle Selection

Choose between regular (1.5h, red light) or intensive (3h, blue light) drying cycles.

Cedis e100 DS Drying Kit Completion and Troubleshooting

Removing Components After Drying

Open lid and remove components once the drying cycle is finished and light is off.

Error Indicator Light

Replace the dryer if the light flashes alternately red and blue, indicating an error.

Advanced Bionics Cedis e100 DS Drying Kit Specifications

General

Product Type	Drying Kit
Product Name	Cedis e100 DS Drying Kit
Category	Dryer
Function	Drying
Included Components	Drying container, desiccant