6
Top view Bottom view
Trigger*
(blue rim)
Audio*
(black
rim)
Micro-USB
Sound processor
programming
cable
Figure 2: Top & bottom views of the CPI-3
* Functionality not available with current software release.
Programming Equipment
You will use the following tools when fitting a patient:
• Clinical Programming Interface (CPI-3) —
Provides a bridge between the computer’s USB port
and the sound processor. Additionally, the CPI-3
delivers power from the computer’s USB port to
the connected sound processor during the fitting
procedure.
• SoundWave software (version 2.2 and later) installed
and running on a PC. You will use SoundWave to
create, customize, and download programs to your
patient’s sound processor(s). Please refer to the
SoundWave manual for further instructions.
To Next Page
Loading...
