What to do if the software does not recognize the Advanced Bionics Recording Equipment CPI-3 as connected?
If the Advanced Bionics Recording Equipment software doesn't recognize the CPI-3, first ensure the blue light is on. If not, consult the troubleshooting steps for the 'Blue LED light is off' issue. You can also try rebooting the SoundWave software.
How to fix a blue LED light that is off on Advanced Bionics Recording Equipment?
If the blue LED light is off on your Advanced Bionics Recording Equipment, try these steps: 1. Check the USB cable connection to the computer. 2. Ensure the USB cable is correctly connected to the CPI-3; disconnect and reconnect it. 3. Use the USB cable supplied by AB, as others may not work. 4. Try different USB ports on your computer. 5. Unplug other USB devices. 6. Request a USB Hub from your AB field representative.
Why are the green LED lights not working on my Advanced Bionics Recording Equipment?
If the green LED lights on your Advanced Bionics Recording Equipment either don't turn on or keep flashing, try the following: 1. Check the connection of the programming cable from the sound processor to the CPI-3. 2. If using the Harmony & Auria programming cable, ensure the pins are fully engaged. 3. If using the Neptune programming cable, make sure the programming header is fully seated on the Neptune sound processor. 4. If using the PSP programming cable, ensure the pins are fully inserted and the black cable lock is secure.
Lists components of the unilateral programming kit.
Lists components of the bilateral programming kit.
Lists accessories available separately from kits.
Details compliance with electromagnetic emissions standards.
Details compliance with electromagnetic immunity standards.
Specifies safe distances from RF transmitters to avoid interference.
Specifies optimal temperature, humidity, and altitude for operation.
General| Brand | Advanced Bionics |
|---|---|
| Model | CPI-3 |
| Category | Recording Equipment |
| Language | English |
To Next Page
