Advanced Diagnostics SMART Pro User Manual

July 2017
Kaba Ilco Corp.
400 Jeffreys Rd., Rocky Mount, NC 27804
Tel: 252-446-3321 • Fax: 252-446-4702
www.ilco.us
The Smart Choice
by Advanced Diagnostics
Q. Can I upgrade from pay as you go tokens to UTP or to software purchasing anytime?
A. Yes.
Q. If I’ve purchased software modules or kits – can I change to a 1 or 12 month subscription UTP plan?
A. Yes – your previously purchased software will remain on the Smart Pro.
Q. How many tokens are deducted for key programming?
A. 1 token per procedure in most cases unless you’ve purchased the software module then no tokens will be deducted.
Q. Does Smart Pro read pincodes for most makes and models of cars worldwide?
A. Yes (manufacturer dependant).
Q. Is technical assistance available if I need support?
A. Yes – by calling Advanced Diagnostics USA Tech Support at (702)799-9705.
Q. How long does the battery last?
A. When connected to the vehicle, Smart Pro will draw power from the vehicle - without connection to a vehicle or the AC/
DC power supply, the battery lasts for up to 2.5 hrs stand alone.
Q. How often should I charge the Smart Pro?
A. We advise recharging when not in use until the battery is fully charged, or until the solid yellow light is visible.
Q. How do I charge the SmartPro battery?
A. Connect the AC / DC mains adpator to the Smart Pro and plug into your wall to charge the Smart Pro battery.
Q. Will the Smart Pro work with a depleted battery?
A. Yes – only when connected to a vehicle or when connected to the AC/DC power supply.
Q. Do I need to deplete the battery completely before re-charging?
A. No.
Q. How do I add more tokens?
A. Contact you distributor to purchase tokens, the distributor will add the tokens to the Smart Pro token bank within the AD
loader. Connect the Smart Pro to the AD loader and download the tokens onto your smart Pro.
FAQ
Continued on Reverse

Advanced Diagnostics SMART Pro Specifications

General

Manufacturer	Advanced Diagnostics
Connectivity	USB
Update Method	Software updates via internet
Compatibility	Various motherboard brands and models
Diagnostic Features	Hardware testing, BIOS updates, component verification
Interface	User-friendly software interface
Software Support	Windows
Power Requirements	USB powered

Summary

Smart Pro Software and Token Management

Upgrade and Subscription Options

Details on upgrading from pay-as-you-go tokens to UTP or software purchasing.

Token Deduction for Key Programming

Explains token usage for key programming procedures.

Adding More Tokens

Instructions on how to purchase and add tokens to the Smart Pro.

WiFi Updates

Information on using WiFi to update Smart Pro software or tokens.

Smart Pro Functionality and Usage

Pincode Reading Capability

Confirms if Smart Pro reads pincodes for various car makes and models.

Technical Assistance Availability

Provides contact information for technical support.

Battery Performance and Charging

Covers battery life, charging frequency, method, and usage with a depleted battery.

OBD Port Voltage Output

Clarifies whether the Smart Pro outputs voltage via the OBD port.

System Operations and Device Migration

24 Hour UTP Period Start

Defines when the 24-hour UTP period begins.

Screen Freeze Troubleshooting

Instructions on performing a hard reset if the screen freezes.

MVP Pro and TCode Pro Migration

Details on transferring tokens and software from older devices to Smart Pro.