To Next PageTo Next Page
Need help?Do you have a question about the Advanced Power technologies TTC-1000 and is the answer not in the manual?
General| Brand | Advanced Power technologies |
|---|---|
| Model | TTC-1000 |
| Category | Temperature Controller |
| Language | English |
Lists the technical specifications of the TTC-1000.
Details how to connect the power supply to the unit.
Information on connecting and installing temperature probes.
Illustrates connections for cooling control and alarm relays.
Discusses telemetry options like RS-232, RS-485, and fiber optics.
Explains how to program settings using the front panel interface.
Details programming settings via a PC using terminal emulation.
Configures settings for calculated winding temperature.
Configures independent temperature set points and logic.
Sets pickup and dropout currents for load detection.
Configures the unit's relay outputs using logic operands.
Lists and describes settings for tap position monitoring.
Detects slowly evolving problems using LTC differential set points.
Detects quickly evolving problems using LTCDIFF rate of rise.
Explains the analog output configuration and scaling.
Describes DNP3.0 and MODBUS communication interfaces.
Transfers binary settings to a designated file on a PC.
Transfers setting files from PC to TTC-1000.
Selects specific data points to be included in the log.
