2
●
1 x 5 - 6 Channel or More Radio Control System
●
2 x .52 - .61 4-Stroke Engines and 12 x 6" or 13 x 6" Propellers
●
2 x High-Torque, Low-Prole Servos for Ailerons
●
2 x High-Torque, Standard Servos for Flaps
●
5 x Standard Servos for Throttles, Rudders and Steering
●
1 x 24" and 36" Servo Extension Leads for Elevator Servo
●
6 x 12" Servo Extension Leads for Aileron and Flap Servos
●
4 x 12" Servo Extension Leads for Throttle and Rudder Servos
●
4 x Y-Harnesses for Ailerons, Flaps, Rudders and Throttles
●
1 x 5 Cell (6 Volt) 1100mAH or greater Capacity Receiver Battery
●
2 x Remote Fueling Valves
●
Five and Thirty Minute Epoxy
●
Thin and Thick C/A
●
C/A Debonder and Rubbing Alcohol
●
Assorted Modeling Tools (i.e., Modeling Knife, Screwdriver, Hex Wrenches, Etc.)
●
Assorted Modeling Supplies (i.e., Sandpaper, Sanding Block, Airplane Stand, Paper Towels, Etc.)
Optional Phneumatic Retract Installation
●
1 x ASM Retract Set and Control System for P-61 Black Widow (P/N ASM-ARS02)
●
1 x ASM Landing Gear Strut Set for P-61 Black Widow (P/N ASM-CSS02)
●
1 x Standard Servo for Retract Air Control Valve
This R/C airplane is not a toy! If misused or abused, it can cause serious bodily injury and/or damage to property. Fly only in open areas and
preferably at a dedicated R/C ying site. We suggest having a qualied instructor carefully inspect your airplane before its rst ight. Please carefully
read and follow all instructions included with this airplane, your radio control system and any other components purchased separately.
SAFETY WARNINGS
ADDITIONAL ITEMS NEEDED TO COMPLETE ASSEMBLY
Because of the number of servos and servo extension leads used, we strongly suggest the use
of a 5 cell (6 Volt) 1100mAH or greater capacity receiver battery.
As an alternative to purchasing multiple servo extension leads, you may want to purchase a bulk
spool of servo wire and connectors and make your own custom-length extension leads.
CUSTOMER SERVICE INFORMATION
To Next Page
