ADAMTCP_Clear6KDILatch
Description:
To clear the latch when a DI channel configured as 'Lo to Hi Latch' or 'Hi to Lo Latch'.
Syntax:
int ADAMTCP_Clear6KDILatch(char szIP[], WORD wIDAddr, WORD wChIndex)
Parameter:
szIP[in]: the IP Address of the target ADAM-6000 module to be connected.
wIDAddr[in]: the Modbus device ID for an ADAM-6000 module. (Always 1)
wChIndex[in]: the specific DI channel need to be cleared the latch status.
Return:
Please refer to Chapter 6-2-3 "Return Codes" for more detail information.
To Next Page
Loading...
