Need help?Do you have a question about the Advantech ADAM-5013 and is the answer not in the manual?
General| Brand | Advantech |
|---|---|
| Model | ADAM-5013 |
| Category | I/O Systems |
| Language | English |
Manual's discussion on ADAM-5000 series I/O modules, functions, and wiring.
Explains analog input modules using A/D converters for signal conversion and data processing.
Details the 16-bit, 3-channel RTD input module for industrial measurement applications.
The ADAM-5017 is a 16-bit, 8-channel analog differential input module that provides programmable input ranges on all channels.
The ADAM-5017P is a 16-bit, 8-channel analog differential input and independent configuration module.
ADAM-5017H is an 8-ch analog differential input module that provides programmable input ranges on each channel.
The ADAM-5017UH is a 12-bit plus sign bit, 8-channel analog differential input module that provides programmable input ranges on each channel.
The ADAM-5018 is a 16-bit, 7-channel thermocouple input module that features programmable input ranges on all channels.
The ADAM-5018P is a 16-bit, 8-channel Thermocouple Independent input module that provides programmable input ranges on all channels.
Covers analog output modules, focusing on the ADAM-5024 4-ch module.
The ADAM-5024 is a 4-channel analog output module. It receives its digital input through the RS-485 interface...
Explains calibration requirements and software utility for analog I/O modules.
Details calibration steps for ADAM-5017, 5017P, 5017H, 5017UH, 5018, and 5018P using utility software.
Calibrates analog output modules using low/high calibration values (4 mA and 20 mA).
Details the specifications and functions of various digital input/output modules.
Details the 16-channel universal digital I/O module, configurable as input or output via DIP switch.
Provides sixteen digital input channels for determining limit/safety switch states or receiving remote signals.
Provides 16 isolated digital input channels for critical environments needing individual channel protection.
Provides eight fully independent isolated channels with 5000 VRMS isolation against ground loops and surges.
Provides 32 isolated digital input channels for critical environments, designed with a 40-pin flat cable wiring terminal.
Offers 8 isolated digital input and 8 isolated output channels for critical environments, using a 21-pin plug terminal.
Features sixteen digital output channels, open-collector transistor switches for controlling solid-state relays.
Provides 16 isolated digital output channels for critical environments, designed with a 21-pin plug terminal.
Offers 16 channels source type isolated digital output for critical environments, with specifications same as ADAM-5056S.
Provides 32 isolated digital output channels for critical environments, designed with a 40-pin flat cable wiring terminal.
Covers relay output modules, including their types, specifications, and applications.
A low-cost alternative to SSR modules, providing 6 relay channels (two Form A, four Form C).
Provides 8 relay channels of Form A, with LED indicators and jumper selectable clear/keep status.
Describes counter/frequency modules, their modes, and configuration options.
Details the 4-channel counter/frequency module, supporting counter or frequency modes for data output.
Details serial communication modules like RS-232, RS-422/485, and CAN modules.
Details the 4-port RS-232 communication module for bi-direction communication with third-party devices.
Details the 4-port RS232/422/485 module with shared interrupt for bi-direction communication.
Offers CAN connectivity with built-in controllers for bus arbitration and error detection with repeat function.
Covers storage modules, specifically the ADAM-5030 SD storage module with USB2.0.
A 2-slot secure digital card storage module providing 2 USB ports and 2 SD slots, low power consuming.
To Next Page
