Need help?Do you have a question about the Advantech ADAM-5050 and is the answer not in the manual?
General| Model | ADAM-5050 |
|---|---|
| Category | I/O Systems |
| Channels | 16 |
| Response Time | 1 ms |
| Communication Interface | RS-485 |
| Protocol | Modbus RTU |
| Power Supply | 10 ~ 30 VDC |
| Input Voltage | 10 ~ 30 VDC |
| Baud Rate | 1200 ~ 115.2k bps |
| Humidity | 10% to 90% RH |
| Input Type | Dry Contact or Wet Contact |
Details the 16-bit, 3-channel RTD input module for industrial measurement.
Describes the 16-bit, 8-channel analog differential input module.
Details the 16-bit, 8-channel analog input module with independent configuration.
Covers the 8-channel high-speed analog input module with programmable ranges.
Explains the 12-bit ultra high-speed analog input module.
Details the 16-bit, 7-channel thermocouple input module.
Describes the 16-bit, 8-channel thermocouple input module.
Details the 4-channel analog output module receiving digital input via RS-485.
Provides steps for calibrating analog input modules using the ADAM utility.
Details the procedure for calibrating analog output modules.
Details the 16-channel universal digital I/O module configurable as input or output.
Explains the 16-channel digital input module for determining switch states.
To Next Page