ADAM-6060 Specification
• Channel: 12
• I/O type: 6 Relay & 6 DI
• Relay Output (Form A):
Contact rating: AC: 120 V @ 0.5 A
DC: 30 V @ 1 A
Breakdown voltage: 500 V
AC
(50/60 Hz)
Relay on time: 7 msec; Relay off time: 3 msec.
Total switching time: 10 msec.
Insulation resistance: 1000 MW minimum at 500 V
DC
• Digital Input:
Dry Contact:
Logic level 0: Close to GND
Logic level 1: Open
(Logic level status can be inversed by Utility)
• Optical Isolation: 5000V
RMS
• Power Consumption: 2 W (Typical)
Application Wiring
Figure 4-17: ADAM-6060 Digital Input Wiring
To Next Page
Loading...
