Need help?Do you have a question about the Advantech ADAM-6217 and is the answer not in the manual?
General| Brand | Advantech |
|---|---|
| Model | ADAM-6217 |
| Category | Control Unit |
| Language | English |
Details on daisy chain connection with auto-bypass protection and group configuration capabilities.
How the ADAM-6200 integrates with IT for remote monitoring and control using HTML5 and REST.
Detailed specifications for the ADAM-6217 8-channel analog input module.
Detailed specifications for the ADAM-6224 4-channel analog output module.
Specifications for digital I/O modules: ADAM-6250, ADAM-6251, ADAM-6256.
Detailed specifications for ADAM-6260 and ADAM-6266 relay output modules.
Explanation of daisy chain topology benefits and implementation for ADAM-6200 modules.
Introduction to ADAM.NET Utility for configuring and monitoring ADAM modules.
Detailed guide on using ADAM.NET Utility for module configuration.
Settings for module information, network, administration, and firmware.
Configuration of network settings, including IP address and port settings.
Procedures for importing and exporting configuration files and upgrading firmware.
Configuration for Peer-to-Peer communication and event handling.
Managing access control by IP or MAC address to prevent unauthorized access.
Setting custom Modbus addresses for flexible module deployment.
Detailed setup of I/O channels, including range, calibration, and alarm settings.
Overview and configuration of analog input channels for ADAM-6217.
Overview and configuration of analog output channels for ADAM-6224.
Overview and configuration of digital input channels for ADAM-6250.
Overview and configuration of digital output channels for ADAM-6256.
Functionality and configuration for module-to-module data transfer.
Configuration for one-way data transmission in Peer-to-Peer mode.
Configuration for multi-target data transmission in Peer-to-Peer mode.
Graphic Logic Condition (GCL) feature for standalone control logic.
Programming logic rules using Input Condition, Logic, Execution, and Output stages.
Defining conditions for logic rules based on input data.
Applying logic operations (AND, OR, NAND, NOR) to input conditions.
Defining execution periods or sending results to the next rule.
Instructions for remotely monitoring and controlling modules via a web server.
To Next Page
