Need help?Do you have a question about the Advantech ADAM-4017 and is the answer not in the manual?
General| Input Channels | 8 |
|---|---|
| Resolution | 16-bit |
| Communication Interface | RS-485 |
| Protocol | Modbus RTU |
| Isolation Voltage | 3000 VDC |
| Input Type | Voltage |
| Input Range | ±1 V, ±10 V, ±20 mA |
| Input Impedance | 1 MΩ |
| Accuracy | ±0.1% of FSR |
| Power Supply | 10 ~ 30 VDC |
| Operating Temperature | -10°C ~ +70°C (14°F ~ 158°F) |
| Storage Temperature | 85°C |
| Humidity | 95% RH |
Details the initial setup process, including default settings and connection diagrams.
Explains how to configure baud rate and checksum settings for communication.
Defines the structure and valid characters for issuing commands to ADAM modules.
Provides a table to help find commands for different I/O modules.
Details commands specific to analog input modules, including configuration and data retrieval.
Provides step-by-step instructions for calibrating analog input modules using utility software.
Describes the capabilities of the ADAM utility software for configuration, calibration, and data access.
To Next Page
