Need help?Do you have a question about the Advantech ADAM-2510Z and is the answer not in the manual?
General| Model | ADAM-2510Z |
|---|---|
| Category | Control Unit |
| Input Channels | 8 |
| Input Type | Dry Contact, Wet Contact |
| Digital Output Channels | 8 |
| Input Voltage Range | 10 ~ 30 VDC |
| Communication Interface | RS-485 |
| Communication | Modbus RTU |
| Power Supply | 10 ~ 30 VDC |
| Wet Contact Logic Level 0 | 0V |
| Wet Contact Logic Level 1 | 3V to 30V |
| Output Voltage | 30 VDC |
| Baud Rate | 1200 ~ 115200 bps |
| Power Consumption | 1.2 W |
| Humidity | 10 ~ 95% RH (non-condensing) |
To Next Page
