Advantech ADAM-2510Z - Adam-2031 Z

51 ADAM-2000 Series User Manual
Appendix A Module Introduction
A.2.2 ADAM-2031Z
Wireless Sensor Network Temperature and Humidity Sensor Node
The ADAM-2031 is an end device embedded sensors to measure the temperature
and humidity physical signal.
A.2.2.1 Specifications
Wireless:
 IEEE Standard: IEEE 802.15.4
 Modulation Type: DSSS (OQPSK)
 Frequency Band: ISM 2.4GHz (2.4 GHz ~ 2.4835 GHz)
 Channels: 11-26
 RF Data Rate: 250 Kbps
 Transmit Power: 3±1 dBm
 Receiver Sensitivity: -97dBm
 Antenna Type: Dipole
 Antenna Gain:0 dBi
 Outdoor Range: 200 m
 Transmission Interval: 1 second ~ 24 hours
 Function: End Device
General:
 Connector: 1x plug-in terminal block (#14-22 AWG)
 Power Input: Unregulated10 ~ 30 V
DC
 Battery Input: 2 x AA Alkaline
 Power Consumption:
– 0.3 W @ 24 V
DC
– 420 uW @ 3 V
DC
(1 minute Tx interval with 2* AA Batteries)
– 240 uW @ 3 V
DC
(2 minute Tx interval with 2* AA Batteries)
– 150 uW @ 3 V
DC
(5 minute Tx interval with 2* AA Batteries)
 Operating Humidity: 20 ~ 95% RH (non-condensing)
 Storage Humidity: 0 ~ 95% RH
 Operating Temperature:-20°C ~ 70°C (-4°F ~ 157.9°F)
 Storage Temperature: -20°C ~ 70°C (-4°F ~ 157.9°F)
Temperature Sensor Input
 Operating Range -40~85°C (-40 ~ 185°F)
 Resolution 0.02°C (0.04°F)
 Accuracy ±0.3°C (0.6°F)
 Repeatability ±0.1°C (0.4°F)
 Response Time 5 ~ 30 seconds (Achieving 63% of a step function)
 Long Term Drift < 0.04°C/Year (0.07°F/Year)
Humidity Sensor Input
 Operating Range 0 ~ 100% RH
 Resolution 0.15% RH
 Accuracy ±2.0% RH
 Repeatability ±0.1% RH
 Response Time 8 seconds (Achieving 63% of a step function)
 Long Term Drift 0.5% RH/Year