ADAM-2000 Series User Manual 30
4.1 System Software Configuration Utility
The ADAM.NET Utility software offers a graphical interface that helps you configure
the ADAM-2000 series. It is also very convenient to test and monitor your remote
data acquisition and control system. The following guidelines will give you some brief
instructions on how to use this Utility. Before installing the ADAM.NET Utility, remem-
ber to first install .NET Framework 1.1 or later from Microsoft website.
4.2 Installing ADAM.NET Utility Software
Advantech provides a free download of ADAM.NET Utility software for module opera-
tion and configuration. You can find the Utility installation file in the CD with your mod-
ule, or on our website at: http://www.advantech.com and click the Download Area
under Service & Support to get the latest version of the ADAM.NET Utility. Once you
download and setup the Utility software, there will be a shortcut of the Utility program
on the desktop.
4.3 ADAM.NET Utility Operation
After you have successfully installed ADAM.NET Utility, there will be one shortcut
icon on the desktop. Double click the shortcut icon that you should be able to see the
operation window.
Figure 4.1 ADAM.NET Utility Operation Window
Caution! 1. Make sure both coordination and devices are in Initial Mode
2. Ensure that you are using a minimum of Windows 2000, XP or
Windows 7
3. Before installing ADAM.NET Utility, you need to install the .NET
Framework 1.1 or later.
To Next Page
Loading...
Need help?
General
